100 PSI Pressure Switch Stage 2 Kit (1-20 PSI of Boost)

Product Information

All Engine Runup Kits now come with a Check Valve setup, instead of the Solenoid.  This change was based on many factors, but the main one is the simplicity of mounting the Check Valve directly at the Injector Mount, allowing zero chance of fluid being replaced by air during vacuum/partial boost scenarios.  The pictures of the Kits will be updated soon to reflect the changes.

The Stage 2 Single Stage Kit adds a couple of more components to the Stage 1 Single Stage Kit..  This kit is activated by a pressure switch, which controls the Shurlfo Pump, to provide instant on/off operation.  A filter is now included to ensure that tiny bits of debris do not clog your injector.  An inline Pressure Detector is also included which serves a dual purpose.  It is placed between the water solenoid and the injector, and when the injector is pressurized, it triggers a switch which illuminates a light in the cockpit so you know everything is working correctly.  The same sensor also serves as a clogged nozzle detector.  When you let off the gas, your water injection kit will immediately switch off as well as the light in the cabin.  If your nozzle is clogged, the pressure will remain in the system between the solenoid and the injector, causing the light in the cockpit to stay illuminated.   The pressure detector is rated at a pressure of 250 psi. unlike other pressure detectors that use a plastic pressure switch which is only good up to 100 psi, the same as the pump.   This kit can be (and all of our Kits can be) controlled by any Stand Alone or Piggy Back computer if they support water injection.

This kit comes with clampless tubing and fittings, so the install is much cleaner and show quality. 

All kits are alcohol safe & are backed by a 1 year warranty (see disclaimer).

To determine your required injector size, find out your fuel injectors size in CC's and then download the spreadsheet in either Microsoft Excel or Microsoft Works.

The 100 PSI Stage 2 Single Stage Kit Includes:

Qty.                                      Item

1         100 PSI Shurflo High Pressure Water Pump
1         Pressure Switch (Adjustable from 1-25 PSI)
1         Pressure Detector / Clogged Nozzle Detector with Instant Fittings
1         Custom Built Solid Brass Check Valve
1         Roll (19 ft.) of TFE Thread Tape Sealer (Ensures Water Tight)
1         Inline Fuse Holder
1         30 Amp Relay which includes the Harness
1         Lighted Switch for Cockpit with Universal Mount
1         Water Filter
1         Injector with Injector Mount Included with Instant Fittings
12'      Colored High Pressure Polyethylene Tubing rated at 500 PSI
7'        Tank to Water Pump Tubing
20       Zip Ties to Secure Wiring and Tubing
15 ft.   Red 14 Gauge Wire
15 ft.   Black 14 Gauge Wire
20       Wire connectors
2          Inline Wire Splicers (Allows you to splice into an existing wire)
4          Spacers for injectors so they fit different thickness of pipes
1          5/64" Allen key to adjust the pressure switch or water pump

Injector Flow Rates:
M1  -  (.011")  -  1.0 GPH @ 100 PSI, 1.2 GPH @ 150 PSI, 63 CC/min @ 100 PSI, 76 CC/min @ 150 PSI
M2  -  (.015")  -  2.0 GPH @ 100 PSI, 2.4 GPH @ 150 PSI, 126 CC/min @ 100 PSI, 151 CC/min @ 150 PSI
M3  -  (.020")  -  3.0 GPH @ 100 PSI, 3.6 GPH @ 150 PSI, 189 CC/min @ 100 PSI, 227 CC/min @ 150 PSI
M4  -  (.024")  -  4.0 GPH @ 100 PSI, 4.8 GPH @ 150 PSI, 252 CC/min @ 100 PSI, 303 CC/min @ 150 PSI
M5  -  (.035")  -  5.0 GPH @ 100 PSI, 6.0 GPH @ 150 PSI, 316 CC/min @ 100 PSI, 379 CC/min @ 150 PSI
M7  -  (.045")  -  7.0 GPH @ 100 PSI, 8.4 GPH @ 150 PSI, 442 CC/min @ 100 PSI, 530 CC/min @ 150 PSI
M11 - (.073")  -  11 GPH @ 100 PSI, 13.2 GPH @ 150 PSI, 694 CC/min @ 100 PSI, 833 CC/min @ 150 PSI

When purchasing this kit, you will have the option to add a Dual Nozzle Upgrade.  This allows two nozzles instead of one for the Single Stage Kits, or four nozzles instead of two for the Dual Stage Kits.  With this upgrade, you will use two smaller injectors, in the place of one large one.  The smaller Nozzles have a smaller water droplet size (measured in microns) versus a larger nozzle.  So instead of one 4 gph injector, this upgrade allows you to run two 2 gph injectors.  Another advantage of this is you can mount the nozzles apart from each other, allowing better dispersal into the air stream.  This is not a mandatory upgrade, but you can see it has its advantages.

Price: $239.99

• Tell a Friend