150 PSI Pressure Switch Stage 1 Kit (1-30 PSI of Boost)

Product Information

All 150 PSI Kits now include the Black Custom Shurflo 150 PSI pump pictured above, which has been specifically designed for Methanol & Water Injection.  The Kit picture will be updated soon to include this new pump.

All Engine Runup Kits now come with a Check Valve setup, instead of the Solenoid.  This change was based on many factors, but the main one is the simplicity of mounting the Check Valve directly at the Injector Mount, allowing zero chance of fluid being replaced by air during vacuum/partial boost scenarios.  The pictures of the Kits will be updated soon to reflect the changes.

The more power your engine produces, the more pump power you will need.  Our pumps are all Shurflo pumps, designed by the company to put out a maximum pressure.  Other companies will buy the cheaper Shurflo pumps, and then increase their output to as much as 200 psi.  This is not what the cheaper pumps were designed for, and will lead to early failure.  All of Engine Runup's Shurflo pumps were designed to output the pressure that we advertise them for.  Be cautious of a 150+ psi pump for under $100 as this pump is most likely not designed for above 100 psi.  If it sounds too good to be true, it probably is.  Any component failure can be serious in certain Water Injection applications, especially if it is the pump, the heart of the system.   This pump is a requirement if you have 400+ horsepower, but it is also a benefit for any car, due to the higher pressures providing a finer, more atomized mist.  This kit is activated by a pressure switch, which controls the Custom Built Shurlfo Pump, to provide instant on/off operation.  Search all you want, you will simply not find a more complete kit for a more affordable price.  Engine Runup keeps overhead costs down, so the savings can be passed on to you.  This kit comes with clampless tubing and fittings, so the install is much cleaner and show quality.  This kit can be (and all of our Kits can be) controlled by any Stand Alone or Piggy Back computer if they support water injection.

All kits are alcohol safe & are backed by a 1 year warranty (see disclaimer).

Click here to see a .pdf document on the pump specifications.

To determine your required injector size, find out your fuel injectors size in CC's and then download the spreadsheet in either Microsoft Excel or Microsoft Works.

The 150 PSI Stage 1 Single Stage Kit includes:

Qty.                         Item

1         150 PSI Shurflo High Pressure Water Pump
1         Pressure Switch (Adjustable from 1-25 PSI)
1         Custom Built Solid Brass Check Valve
1         Roll (19 ft.) of TFE Thread Tape Sealer (Ensures water tight thread seals)
1         Inline Fuse Holder with 15 amp fuse
1         30 Amp Relay which includes the Harness
1         Lighted Switch for Cockpit with Universal Mount
1         Injector with Injector Mount Included with Clampless Fittings
8'        Colored High Pressure Polyethylene Tubing rated at 500 PSI
7'        Tank to Water Pump Tubing
10       Zip Ties to Secure Wiring and Tubing
10 ft.   Red 14 Gauge Wire
10 ft.   Black 14 Gauge Wire
13       Wire connectors
2          Tap Splicers (Allows you to splice into existing wire)
4          Spacers for injectors so they fit different thickness of pipes
1          5/64" Allen key to adjust pressure switch and/or water pump

Injector Flow Rates:
M1  -  (.011")  -  1.0 GPH @ 100 PSI, 1.2 GPH @ 150 PSI, 63 CC/min @ 100 PSI, 76 CC/min @ 150 PSI
M2  -  (.015")  -  2.0 GPH @ 100 PSI, 2.4 GPH @ 150 PSI, 126 CC/min @ 100 PSI, 151 CC/min @ 150 PSI
M3  -  (.020")  -  3.0 GPH @ 100 PSI, 3.6 GPH @ 150 PSI, 189 CC/min @ 100 PSI, 227 CC/min @ 150 PSI
M4  -  (.024")  -  4.0 GPH @ 100 PSI, 4.8 GPH @ 150 PSI, 252 CC/min @ 100 PSI, 303 CC/min @ 150 PSI
M5  -  (.035")  -  5.0 GPH @ 100 PSI, 6.0 GPH @ 150 PSI, 316 CC/min @ 100 PSI, 379 CC/min @ 150 PSI
M7  -  (.045")  -  7.0 GPH @ 100 PSI, 8.4 GPH @ 150 PSI, 442 CC/min @ 100 PSI, 530 CC/min @ 150 PSI
M11 - (.073")  -  11 GPH @ 100 PSI, 13.2 GPH @ 150 PSI, 694 CC/min @ 100 PSI, 833 CC/min @ 150 PSI

When purchasing this kit, you will have the option to add a Dual Nozzle Upgrade.  This allows two nozzles instead of one for the Single Stage Kits, or four nozzles instead of two for the Dual Stage Kits.  With this upgrade, you will use two smaller injectors, in the place of one large one.  The smaller Nozzles have a smaller water droplet size (measured in microns) versus a larger nozzle.  So instead of one 4 gph injector, this upgrade allows you to run two 2 gph injectors.  Another advantage of this is you can mount the nozzles apart from each other, allowing better dispersal into the air stream.  This is not a mandatory upgrade, but you can see it has its advantages.

Price: $199.99

• Tell a Friend